Electrical / Electronics
-
BA 1089
BA 1089 is a pressure sensitive tape using a tensilized skived PTFE film coated with a high temperature acrylic adhesive. The tensilized film provides higher tensile strength, lower elongation and higher dielectric strength than a regular skived film. BA 1089 will remove cleanly at elevated temperatures and has good solvent resistance. This product passes all low outgassing requirements as stated in ASTM E-595.
BA 1089 TDS
Related Products
BA 12988 and BA 12989
Non-Silicone Red or Violet Polyester Tape
BA 1844 and BA 1944
Green Non-Silicone Zero-Residue Flash Tape
BA 193D
PTFE Film
BA 8855
PTFE Film -
BA 14-1
BA 14-1 is a laminated tape engineered for the wire and cable industry.
TDS BA 14-1
Related Products
-
BA 193D
BA 193D is a pressure sensitive tape using a skived & tensilized PTFE film that is coated with “high temperature” silicone adhesive. The tensilized film provides higher tensile strength, lower elongation and higher dielectric strength than regular skived film.
TDS BA 193D
Related Products
-
BA 306
BA 306 is a pressure sensitive tape made of FEP (Teflon ®) film that is coated with a high temperature silicone adhesive. The FEP film is optically clear and offers excellent electrical properties and chemical resistance.
BA 306 TDS
Related Products
-
BA 31T
BA 31T is a glass cloth electrical tape, with a 7-mil woven insulating glass cloth tape with an acrylic pressure-sensitive adhesive. BA 31T is used to electrically insulate and provide mechanical protection at temperatures 302oF. BA 31T provides insulation and solvent-resistant protection for use as a coil cover, anchor, banding and core layer cross over insulation. It is edge tear resistant, conformable and printable.
BA 31T TDS
Related Products
-
BA 327
BA 327 (2Mil PET/rubber Adhesive) is manufactured from polyester film with rubber pressure-sensitive adhesive.
TDS BA 327
Related Products
-
BA 500BCGW beta cloth
BA 500BCGW, utilizes a tightly woven Beta® fiberglass substrate with a woven-in grid of graphite yarn to provide static dissipative performance. This material is commonly used in aerospace applications (e.g. Space Shuttle, International Space Station). For applications that do not require electrical static dissipation, please refer to the data sheet for BA 500BC. This product is silicone free.
BA 500BCGW TDS
Related Products
BA 500BC (CF500) Beta Cloth
PTFE Coated Glass Fabric
BA DM102
First Surface Mirror & MLIB Edge Sealing Tape -
-
BA 731T
BA731T is a Glass Cloth Electrical Tape coated with a Thermosetting Acrylic Adhesive. This tape provides insulation and mechanical protection at temperatures to 300o F or 150o C. BA731T is both conformable and printable with good solvent resistance.
TDS BA 731T
Related Products
-
BA 81105
BA 81105 is manufactured from heat resistant fiberglass cloth backing coated with high-temperature silicone adhesive on both sides. It is most widely used as a high temperature masking tape for metalizing or plasma spray coatings, but is also used as a holding tape for components on circuit boards, inner wraps for coils and transformers, and high temperature splicing.
TDS BA 81105
Related Products
