BA 23TS QMT
BA 23TS QMT is a paper backed pressure-sensitive tape with easy clean removal from most surfaces. Used for part marking and color coding.
TDS BA 23TS QMT
BA 31T is a glass cloth electrical tape, with a 7-mil woven insulating glass cloth tape with an acrylic pressure-sensitive adhesive. BA 31T is used to electrically insulate and provide mechanical protection at temperatures 302oF. BA 31T provides insulation and solvent-resistant protection for use as a coil cover, anchor, banding and core layer cross over insulation. It is edge tear resistant, conformable and printable.
BA 31T TDS
BA 6866 Drill and Countersink Surface Protection & Paint Masking Tape
BA 6866 is a unique, soft, flexible PVC tape with an aggressive but clean removal natural rubber adhesive. Gold or clear in color, this tape will remove from a variety of production surfaces – even under extreme temperature, UV exposure, and direct chemical contact. BA 6866 is superior for general surface protection, painting and coating applications, and drill and countersink protection. The primary advantage of the BA 6866 clear tape is that the production surface is visible through the tape, allowing for accurate identification of drill/countersink locations for defect reduction. BA 6866 is also ideal for fineline masking if a very sharp paint edge is required, especially on painted or unpainted plastic parts and for multi-color painting.
TDS BA 6866 and FOD Control (Printed) Tape
BA 936XP is a Glass Cloth Electrical Tape coated with an aggressive thermosetting acrylic adhesive. This tape provides insulation and mechanical protection at temperatures to 310oF or 154oC. BA 936XP is both conformable and printable with good solvent resistance.
TDS BA 936XP
Laser marking or engraving is a complimentary process to thermal heat transfer. While laser engraving is slower than THT, it is second to none in print permanence. The printing process of these labels also creates a very high resolution print – so precise that it can reach up to 1200 dpi, making it ideal for the small font applications that are often required in electrical component boards.
B-421 is designed for use in labeling electronic PCB’s, component identification, bar coding, and rating plates when marked with a standard IR laser. The product can be used for auto-dispensing applications and can meet small font requirements when used with a high resolution laser marking system.
-Repeated harsh aqueous cleaning resistance
-High temperature, wave soldering resistance up to 572° F (300° C)
-Custom sizes engineered-to-order and ready to ship in under 3 weeks
-Compatibility with most IR laser marking systems
-Optional ESD prevention layers
-Reduced rework issues related to direct laser marking board materia
Brady B-437 Tedlar® Wire Wrap Labels are self-extinguishing and exhibit good solvent and heat resistance. This material is intended for cable and wire bundle applications where self-extinguishing properties are required.
B-472 Matte finish Polyimide Wire Wraps are highly flame-retardant and specifically designed for wire and cable identification applications where self-extinguishing and flame retardant properties are an absolute requirement. In addition, B-472 can also be used for component labeling and Unique Identification (UID) labeling.
B-730 is designed to meet the requirements for pre-process labeling of printed circuit boards and electronic components when marked with standard IR lasers. The product can be used for auto-dispensing applications and can meet small font requirements when used with a high resolution laser marking system.
B-731 is designed to meet the requirements for pre-process labeling of printed circuit boards and electronic components when marked with standard IR lasers. The product can be used for auto-dispensing applications and can meet small font requirements when used with a high resolution laser marking system.
B-731 is constructed with a static dissipative adhesive. This product has adhesive surface resistivity values in the recommended range for dissipative ESD packaging materials as defined by ANSI/ESD S541-2008 (between 10 4 and 10 11 ohms).
B-999 Subsurface Printed Fluid Line Identification Tape is available in a continuous roll form or die-cut format. It is a subsurface printed, flexible, transparent polyester film tape with heat activated adhesive. The adhesive has superior resistance to fuels, oils, and hydraulic fluids when compared to typical pressure sensitive adhesives. The B-999 tape’s low initial adhesion makes the tape easy to reposition when first applied.
Type 1 – 1” wide without a printable zone
Type 2 – 3” wide with dot matrix or thermal transfer printable zone
Available in common color code legends