Surface Protection
-
BA 102
BA 102 media blast is a tan rubber sandblast stencil. Computer cuttable, BA 102 is designed to be used with most computer plotters. It is available in friction feed and slot or tractor feed designs.
TDS BA 102
Related Products
-
BA 103
BA 103 is a heavy duty product custom engineered for protective masking of surfaces during dry paint stripping processes and extreme surface protection. The high tack acrylic adhesive provides instant adhesion to clean, dry surfaces. The soft vinyl carrier is highly flexible and conformable to irregular/curved surfaces, while holding firmly to the production surface. Thickness throughout the roll is very consistent allowing maximum blast times. BA 103 also provides clean removal post process and use.
BA 103 TDS Data Sheets:
You need to login to access the data sheets. Please Login. No password? Register -
BA 1089
BA 1089 is a pressure sensitive tape using a tensilized skived PTFE film coated with a high temperature acrylic adhesive. The tensilized film provides higher tensile strength, lower elongation and higher dielectric strength than a regular skived film. BA 1089 will remove cleanly at elevated temperatures and has good solvent resistance. This product passes all low outgassing requirements as stated in ASTM E-595.
BA 1089 TDS
Related Products
BA 12988 and BA 12989
Non-Silicone Red or Violet Polyester Tape
BA 1844 and BA 1944
Green Non-Silicone Zero-Residue Flash Tape
BA 193D
PTFE Film
BA 8855
PTFE Film -
BA 1203
BA 1203 is a heavy duty product custom engineered for protective masking of surfaces during dry paint stripping processes and extreme surface protection. The high tack acrylic adhesive provides instant adhesion to clean, dry surfaces. The soft vinyl carrier is highly flexible and conformable to irregular/curved surfaces, while holding firmly to the production surface. Thickness throughout the roll is very consistent allowing maximum blast times. BA 1203 also provides clean removal post process and use.
BA 1203 TDS
Related Products
-
BA 14-1
BA 14-1 is a laminated tape engineered for the wire and cable industry.
TDS BA 14-1
Related Products
-
BA 1544, BA 1844, BA 1944
BA 1544 is a 5 mil polyester film tape with a high temperature resistant rubber based pressure sensitive adhesive system.
BA 1844 is a 2 mil polyester film tape with a high temperature resistant rubber based pressure sensitive adhesive system.
BA 1944 is a 1 mil polyester film tape with a high temperature resistant rubber based pressure sensitive adhesive system.
TDS BA 1544
TDS BA 1844
TDS BA 1944
Related Products
-
BA 1738
BA 1738 is a high performance self-adhering surface protection tape. It has a thicker backing than traditional protective tapes, providing superior scratch resistance from tools and other objects used to repair aircraft. BA 1738 also provides clean removal from many surfaces and coatings while enduring exposure to temperature change, humidity, and UV.
BA 1738 TDS
-
BA 1804-7
The substrate of BA 1804-7 is manufactured from heat-resistant fiberglass cloth backing coated with high-temperature silicone adhesive on both sides.
BA 1804-7 is preferred for a wide variety of uses in the industrial and electrical markets to include use as a high temperature masking tape for metalizing or plasma spray coatings, and as a holding tape for components on circuit boards, inner wraps for coils and transformers, and high temperature splicing.
BA 1804-7 comes with a kraft paper liner or yellow dimpled PVC liner.
TDS BA 1804-7
-
BA 1864-8R-GE
BA 1864-8R-GE is manufactured from silicone rubber/fiberglass cloth back coated with high temperature adhesive.
TDS BA 1864-8R-GE
Related Products
-
BA 193D
BA 193D is a pressure sensitive tape using a skived & tensilized PTFE film that is coated with “high temperature” silicone adhesive. The tensilized film provides higher tensile strength, lower elongation and higher dielectric strength than regular skived film.
TDS BA 193D
