BA 1089 is a pressure sensitive tape using a tensilized skived PTFE film coated with a high temperature acrylic adhesive. The tensilized film provides higher tensile strength, lower elongation and higher dielectric strength than a regular skived film. BA 1089 will remove cleanly at elevated temperatures and has good solvent resistance. This product passes all low outgassing requirements as stated in ASTM E-595.
BA 1089 TDS
BA 1544, BA 1844, BA 1944
BA 1544 is a 5 mil polyester film tape with a high temperature resistant rubber based pressure sensitive adhesive system.
BA 1844 is a 2 mil polyester film tape with a high temperature resistant rubber based pressure sensitive adhesive system.
BA 1944 is a 1 mil polyester film tape with a high temperature resistant rubber based pressure sensitive adhesive system.
TDS BA 1544
TDS BA 1844
TDS BA 1944
BA 255 is a polyester film with acrylic pressure-sensitive adhesive.
TDS BA 255
BA 6866 Composite Drill Breakout Tape
BA 6866 is a flexible soft tape with a natural rubber adhesive for strong adhesion to the production surface but clean removal. The tape is configured in either a coin-shape or strip-shape, and mounted on a clear peel-off resin liner. Within the coin or strip, a layer of non-adhesive LDPE adds needed support when thru-drilling cured carbon fiber parts. Reduction of carbon fiber fragmentation at the drilled-hole “breakout” edge is achieved.
*BA 6866 Composite Drill Breakout Tape is configured as a 2” x 2” patch with a 1” OD LDPE circle insert, or as a 2” x 8” patch with a 1” x 6” LDPE insert. Other sizes and configurations available.
Composite Drill Breakout Tape TDS
BA 6866 Drill and Countersink Surface Protection & Paint Masking Tape
BA 6866 is a unique, soft, flexible PVC tape with an aggressive but clean removal natural rubber adhesive. Gold or clear in color, this tape will remove from a variety of production surfaces – even under extreme temperature, UV exposure, and direct chemical contact. BA 6866 is superior for general surface protection, painting and coating applications, and drill and countersink protection. The primary advantage of the BA 6866 clear tape is that the production surface is visible through the tape, allowing for accurate identification of drill/countersink locations for defect reduction. BA 6866 is also ideal for fineline masking if a very sharp paint edge is required, especially on painted or unpainted plastic parts and for multi-color painting.
TDS BA 6866 and FOD Control (Printed) Tape
BA 7880 is a blue polyester tape with a silicone adhesive. It can be used in a large variety of high temperature applications including powdercoat masking, flashbreaker and bag sealing applications. Additional applications include splicing, tabbing, or roll closing silicone treated liners or materials.
TDS BA 7880
BA 7881 is a dark green polyester tape with a silicone adhesive. It can be used in a large variety of high temperature applications including powdercoat masking, flashbreaker, and bag sealing applications. Additional applications include splicing, tabbing or roll closing silicone treated liners or materials.
TDS BA 7881
BA 8825-2 is an extruded, oriented, high modulus PTFE Film coated with high temperature pressure sensitive adhesive.
TDS BA 8825-2
The substrate of BA 9003 is a unique light weight and flexible reinforced polyethylene flat yarn. BA 9003 is an indoor/outdoor UV protection sheet designed for the aerospace industry, and has some flame retardant features.
TDS BA 9003
The substrate of BA 9004 is a unique polyethylene cloth laminated with LDPE. This substrate coupled with the proprietary adhesive provides superior physical properties and easy handling features when compared to other conventional tapes. This tape has passed FAR 25.853(a) burn testing.*
TDS BA 9004B
*Product should be tested by customer to confirm FAR burn test requirements