BA 102 media blast is a tan rubber sandblast stencil. Computer cuttable, BA 102 is designed to be used with most computer plotters. It is available in friction feed and slot or tractor feed designs.
TDS BA 102
BA 1203 is a heavy duty product custom engineered for protective masking of surfaces during dry paint stripping processes and extreme surface protection. The high tack acrylic adhesive provides instant adhesion to clean, dry surfaces. The soft vinyl carrier is highly flexible and conformable to irregular/curved surfaces, while holding firmly to the production surface. Thickness throughout the roll is very consistent allowing maximum blast times. BA 1203 also provides clean removal post process and use.
BA 1203 TDS
The substrate of BA 1804-7 is manufactured from heat-resistant fiberglass cloth backing coated with high-temperature silicone adhesive on both sides.
BA 1804-7 is preferred for a wide variety of uses in the industrial and electrical markets to include use as a high temperature masking tape for metalizing or plasma spray coatings, and as a holding tape for components on circuit boards, inner wraps for coils and transformers, and high temperature splicing.
BA 1804-7 comes with a kraft paper liner or yellow dimpled PVC liner.
TDS BA 1804-7
BA 1864-8R-GE is manufactured from silicone rubber/fiberglass cloth back coated with high temperature adhesive.
TDS BA 1864-8R-GE
BA 23TS is a paper backed pressure-sensitive tape with a specially formulated adhesive designed for exposure to sunlight up to (14) days, exhibiting easy clean removal from most surfaces.
TDS BA 23TS
BA 3763 WingSafe Tape is paper-stock, film-reinforced, and top-coated with a superior non-slip coating. BA 3763 is coated on the adhesive side with a high-performance urethane adhesive for consistent stick and clean removability while leaving no residue. Designed to be applied to large areas requiring protection (hulls, wings, decks, etc.) where traffic and equipment could cause dents, scratches, and imperfections.
TDS BA 3763
BA 4650 is a single-sided tape with a laminated polyethylene cloth and proprietary acrylic adhesive. BA 4650 offers superior physical properties and easy handling compared with conventional tapes.
BA 4650 TDS
BA 500BC / CF500 F (Beta Cloth, Beta Fabric)
BA 500BC TDS
Beta cloth, also called beta fabric, is a white, PTFE-impregnated glass cloth commonly employed as an outer MLIB (Multi Later Insulation Blanket) layer due to its AO (atomic oxygen) resistance in LEO (Low Earth Orbit). It was heavily used on the Space Shuttle and continues to protect the interior and exterior of the International Space Station (ISS).
Beta cloth products are comprised of a high performance PTFE (Teflon™) and glass composite used as a component for MLI (multi-layer insulation) blankets. Often used as the outer layer, special design of the product provides the strength, resistance to flex fatigue and handle which sets it apart from other standard coated fabrics, and makes it more suitable for space applications. This lightly coated, low outgassing material has a great deal of flight legacy being used in proximity to sensitive components and equipment. In many applications, some properties or values are diminished by end of life as the effects of thermocycling, atomic oxygen, solar ultraviolet radiation, vacuum ultraviolet radiation, and space debris attack the exposed surface. Our Beta cloth fabrics are able to withstand these harsh conditions, serving as a barrier and protecting the inner surface.
This historic material is manufactured by Saint-Gobain Coated Fabrics in Manchester, NH USA and is supplied to the aerospace market exclusively by Bron Aerotech, Inc in Denver, Colorado. Bron Aerotech facilitated the successful re-qualification of beta cloth at aerospace OEMs when DuPont changed the Teflon formulation to reduce and then eliminate PFOA.
We supplied NASA (JPL) with beta cloth that is still protecting the nuclear power plant of Curiosity on planet Mars, 32 million miles from Earth.
The most common end products associated with beta cloth (non-silicone) are:
BA 500BC / CF500 raw beta cloth
Etched beta cloth for bonding and laminating
Beta cloth tape for cable/wire wrap
BA 500BC-966 beta cloth with low outgassing adhesive
BA 500BCGW beta cloth with graphite wire/weave for conductivity/anti-static
BA 125BCL light weight beta cloth (also available with graphite weave)
Metalized (VDA) beta cloth
Beta Cloth on Space Station during EVA (Space Walk).
Beta cloth, aka beta fabric, was designed and manufactured to withstand the harsh environment of space in order to protect sensitive and expensive equipment. It was at one time used in space suit manufacturing.
April 25, 1990, photograph taken by the crew of the STS-31 space shuttle mission, the Hubble Space Telescope is suspended above shuttle Discovery’s cargo bay some 332 nautical miles above Earth. The Canadian-built Remote Manipulator System (RMS) arm, controlled from in-cabin by the astronaut crew members, held the huge telescope in this position during pre-deployment procedures, which included extension of solar array panels and antennae. (Source: NASA)
For more information or to purchase beta cloth, please contact us :
Saint-Gobain Coated Fabrics
BA 500BCGW beta cloth
BA 500BCGW, utilizes a tightly woven Beta® fiberglass substrate with a woven-in grid of graphite yarn to provide static dissipative performance. This material is commonly used in aerospace applications (e.g. Space Shuttle, International Space Station). For applications that do not require electrical static dissipation, please refer to the data sheet for BA 500BC. This product is silicone free.
BA 500BCGW TDS