Surface Treatment
-
ARDROX® 1218
Ardrox 1218 is a blend of phosphoric acid and inhibitors. It will remove rust, heat treatment scale and welding scale from ferrous metals. Corrosion products on aluminum, copper and zinc alloys may also be removed.
Ardrox 1218 is especially suitable for use on chromium plated ferrous materials and ferrous surfaces which require very close tolerances.
Ardrox 1218 TDS
Ardrox 1218 MSDS
- Approvals:
SAE ARP 1755 Rev.B (Conformance)
US Department of Defence MIL-C-10578 Rev.C (Conformance)
Airbus CML 10BDB1
CFM International CFM56 CPM – CP2438
General Electric Commercial Engines SPM 70-80-04, Ref.C04-121
Pratt & Whitney SPM 70-12-00, SPMC 21
S.N.E.C.M.A. DMR 70-620
- Approvals:
-
ARDROX® 1250
ARDROX 1250 is a liquid mildly thixotropic acidic product designed to remove light soils and oxides from aluminum aircraft surfaces. ARDROX 1250 produces a uniform finish and can be used prior to conversion coating; anodizing; or welding. ARDROX 1250 may also be used to remove light rust from steel surfaces.
Ardrox 1250 TDS
Ardrox 1250 MSDS
-
ARDROX® 1435
Ardrox 1435 is a two part alkaline liquid concentrate containing an oxidizing material. It is primarily intended as an aid in removing difficult heat scale such as those produced on high chromium steels and nickel and cobalt alloys, which are notoriously difficult to remove even with strong acids. Ardrox 1435 will not normally remove such scales by itself, but will chemically and physically modify them in such a manner as to make them more easily removable by milder and less dangerous methods than the use of strong acids.
The main field of use for Ardrox 1435 is the overhaul of “hot end” components of gas turbine engines. Ardrox 1435 has also been found useful for the removal of adherent carbon smut produced after heat treatment.
Ardrox 1435 TDS
Ardrox 1435 MSDS
- Approvals
CFM International CFM56 SPM – S1235 & CP2708
GE Commercial Engines SPM 70-80-04, Ref. C04-279
Pratt & Whitney SPM 70-22-00, SPMC 203-1 &203-2
Rolls-Royce CSS 249 & OMat 198L
SAE ARP 1755B (conformance)
Turbomeca TS 00540L
- Approvals
-
ARDROX® 185L
Ardrox 185L is a highly alkaline concentrated solution in water containing sequestrants. It is also available as a powder under the name Ardrox® 185. Ardrox 185L is primary intended for the removal of heavy rust and scale from ferrous components in immersion tanks but it is also capable to remove oil, grease and some air-dried paints. It will not attack or cause hydrogen embrittlement in ferrous alloys and there is markedly less tendency for re-rusting to occur than with acid pickling.
When used in conjunction with the adequate other Ardrox® specialties, Ardrox® 185L can be used to remove scale from hot-end jet engine components. It can also be used for cleaning parts made of Titanium.
Ardrox 185L TDS
Ardrox 185L MSDS
- Approvals:
SAE ARP 1755B (conformance)
CFMI CFM56
Rolls Royce CSS244 & OMat
SNECMA DMR 70-620
GE SPMC 70-80-04
Pratt & Whitney SPMC 70-12-00
Turbomeca
- Approvals:
-
ARDROX® 1873A
Ardrox 1873A is a concentrated liquid mixture of sequestrants and surfactants. It is mildly acidic. Ardrox 1873A has been formulated specifically to descale the chrome steels, stainless steels, nickel and cobalt alloys used in the manufacture of aircraft turbine engines. During service these parts become covered with hard adherent oxide scale, which must be removed during overhaul periods to enable penetrant inspection processes to be carried out.
Ardrox 1873A TDS
Ardrox 1873A MSDS
- Approvals:
CFM International CFM56 CPM – CP 2395
GE Commercial Engines SPM 70-80-04, Ref. C04-240
Pratt & Whitney SPM 70-12-00, SPMC 191
Rolls-Royce OMat 1/152 & 1/153
SAE ARP 1755 Rev. B (Conformance)
SNECMA DMR 70-620 Rev. A
Turbomeca TS 00540 Rev. L
- Approvals:
-
ARDROX® 2302
Ardrox 2302 is a mixture of solvents, activators and corrosion inhibitors. It consists of two layers: an upper layer oil seal to prevent evaporation of the active paint removing solvents in the lower layer. Ardrox 2302 contains no phenolic compounds, aromatic solvents or heavy metals.
Ardrox 2302 will remove a wide range of paint schemes including baked acrylics, epoxies, polyurethanes, and phenolics. It will also remove carbon or carbonaceous deposits, polymerized gum and lacquer deposits.
Ardrox 2302 TDS
Ardrox 2302 MSDS
- Approvals:
CFMI CFM56
GE Aviation SPM 70-80-04
IAE V2500
Pratt & Whitney SPM 70-12-00
Rolls Royce CSS 235 & OMat 1/226
SNECMA DMR 70-129
- Approvals:
-
ARDROX® 2814
Ardrox 2814 is an acid-activated paint remover. It is designed to remove durable paint systems, such as epoxy and polyurethane, from aircraft and other surfaces. It contains no halogenated solvents.
Ardrox 2814 TDS
Ardrox 2814 MSDS
- Approvals:
Airbus CML 09CBB1
Boeing D6-17487 (partial conformance)
Gulfstream GAMPS 4000
McDonnell Douglas DPM 5619N
US DoD MIL-R-81903 (partial conformance)
- Approvals:
-
ARDROX® 2871
Ardrox 2871 is a peroxide-accelerated non-acid paint remover. It is designed to remove durable paint systems, such as epoxy and polyurethane, from aircraft and other surfaces. It contains no halogenated solvents, and its combination of near neutral pH and low odor makes it an excellent choice in areas where personnel are working.
Ardrox 2871 TDS
Ardrox 2871 MSDS
-
ARDROX® 295-G
Ardrox 295-G is a non-chromated, acidic material for removing oxides, alkaline etching, smut and
discoloration from aluminum and aluminum alloys. It is used before chromate conversion coating, nonchrome conversion coating, anodizing, electrical resistance welding, and other operations that require a very low level of surface contamination.Ardrox 295-G performs well in hard water, requires no heat, deoxidizes rapidly and rinses freely. It meets Boeing Process Specification BAC 5765, Cleaning and Deoxidizing Aluminum Alloys, and can be used to meet the requirements of SAE-AMS-W-6858, Welding, Resistance: Spot and Seam.
Ardrox 295-G TDS
Ardrox 295-G MSDS
-
ARDROX® 3968
Ardrox 3968 is a corrosion-inhibiting, de-watering fluid which will excellently displace fresh or salt water from metal surfaces. It contains a volatile solvent and when this has evaporated, a very thin oil film remains which gives protection to the metal surface.
Ardrox 3968 TDS
Ardrox 3968 MSDS
- Approvals
SAE AMS 3065 (conformance)
CFMI CFM56
GE SPMC 70-80-02
Messier-Dowty PCS 2800
Pratt & Whitney SPMC 124-1
Rolls Royce OMat
Turbomeca TS 00800
- Approvals
