Abrasion Resistant
-
BA 4650
BA 4650 is a single-sided tape with a laminated polyethylene cloth and proprietary acrylic adhesive. BA 4650 offers superior physical properties and easy handling compared with conventional tapes.
BA 4650 TDS
-
BA 1804-7
The substrate of BA 1804-7 is manufactured from heat-resistant fiberglass cloth backing coated with high-temperature silicone adhesive on both sides.
BA 1804-7 is preferred for a wide variety of uses in the industrial and electrical markets to include use as a high temperature masking tape for metalizing or plasma spray coatings, and as a holding tape for components on circuit boards, inner wraps for coils and transformers, and high temperature splicing.
BA 1804-7 comes with a kraft paper liner or yellow dimpled PVC liner.
TDS BA 1804-7
-
BA 8783
BA 8783 is a premium grade self-adhesive tape that has been developed for the protection of delicate surfaces, e.g. painted metal surfaces during automotive assembly.
TDS BA 8783
-
BA 6866 Composite Drill Breakout Tape
BA 6866 is a flexible soft tape with a natural rubber adhesive for strong adhesion to the production surface but clean removal. The tape is configured in either a coin-shape or strip-shape, and mounted on a clear peel-off resin liner. Within the coin or strip, a layer of non-adhesive LDPE adds needed support when thru-drilling cured carbon fiber parts. Reduction of carbon fiber fragmentation at the drilled-hole “breakout” edge is achieved.
*BA 6866 Composite Drill Breakout Tape is configured as a 2” x 2” patch with a 1” OD LDPE circle insert, or as a 2” x 8” patch with a 1” x 6” LDPE insert. Other sizes and configurations available.
Composite Drill Breakout Tape TDS
-
BA 6145
BA 6145 is a transparent double-sided self-adhesive tape consisting of a PET backing and a modified acrylic adhesive. It offers a reliable bond even to low surface energy substrates and is immediately usable after assembly. BA 6145 is suitable for the most demanding applications such as heavy stress, high temperatures and critical substrates.
BA 6145 TDS
-
BA 8110ESD
BA 8110ESD is manufactured from ESD Polyimide film with a high-temperature silicone adhesive. It is constructed to fill the requirements of a high-performance Thermoplastic (Polyimide Backing Materials). BA 8110ESD is material of choice for gold finger protection during wave solder applications that require reduced electrostatic discharge upon tape removal. BA8110ESD exhibits high tensile strength and conformability, as well as good solvent resistance, excellent dielectric strength and good abrasion resistance.
BA 8110ESD TDS
-
BA Green Flash 1R-SF
BA Green Flash 1R-SF is a 1 mil polyester film tape with a high temperature resistant rubber based pressure sensitive adhesive tape.
BA Green Flash 1R-SF TDS
-
BA 8134
BA 8134 is a PET fleece wire harness tape with a rubber based adhesive.
TDS BA 8134
-
BA 7315
BA 7315 is a standard grade polyethylene coated cloth tape with a 55 mesh woven PET/rayon fabric backing coated with a pressure sensitive natural rubber adhesive.
TDS BA 7315
-
BA 6439
BA 6439 is a strong acrylic coated cloth tape with a mesh woven rayon fabric backing and a natural rubber adhesive.
TDS BA 6439